Installation manual
.
1. Make your online payment.
.
2. Youīll be redirected to the download zone. Download and install the setup file.
.
3. Once you complete the setup process, the registration tool will be in START->PROGRAMS->GlobalMap.
.
4. You will receive an e-mail with your product number.
.
5. Run the registration tool, enter your product number and follow instructions.
.
6. Once you have completed the registration process, your new Iraq maps will be added in to your MapSource map list as shown below: (If you donīt have MapSource on your PC, Click HERE)
.
1. Make your online payment.
.
2. Youīll be redirected to the download zone. Download and install the setup file.
.
3. Once you complete the setup process, the registration tool will be in START->PROGRAMS->GlobalMap.
.
4. You will receive an e-mail with your product number.
.
5. Run the registration tool, enter your product number and follow instructions.
.
6. Once you have completed the registration process, your new Iraq maps will be added in to your MapSource map list as shown below: (If you donīt have MapSource on your PC, Click HERE)
7. Select the Iraq product from the dropdown list to view the map. If you donīt see this drop down list, you can click on the upper menu VIEW -> SWITCH TO PRODUCT and select Iraq.
.
8. Now you should see the new Iraq map divided in 10 regions.
9. Using the map selection tool, select the areas you wish to transfer to your GPS.
.
8. Now you should see the new Iraq map divided in 10 regions.
9. Using the map selection tool, select the areas you wish to transfer to your GPS.
10. Selected areas that are ready to transfer will turn pink as you select them.
.
11. Turn on and plug your GPS to your PC.
12. Press the transfer button to begin transfer the maps to your GPS.
.
11. Turn on and plug your GPS to your PC.
12. Press the transfer button to begin transfer the maps to your GPS.
13. A new window will pop-up. Make sure the "Maps" option is enabled.
.
14. Press the "Send" button.
15. Maps will be transfered to your GPS.
Notice: The Iraq maps will replace any other map set you have previously downloaded to your GPS. The North America base map (default map) will not be affected. All your way points and tracks will remain the same.
.
14. Press the "Send" button.
15. Maps will be transfered to your GPS.
Notice: The Iraq maps will replace any other map set you have previously downloaded to your GPS. The North America base map (default map) will not be affected. All your way points and tracks will remain the same.
If you donīt have MapSource installed, you can still transfer your new Iraq maps to your GPS using our free transfer tool included in our registration software. Follow these steps:
(This free transfer tool is not compatible with the following GPS models: NUVI, iQue and C550)
1. Just click the link "I donīt have MapSource" on our registration software once you have registered it to run the transfer tool.
2. Click "Add maps"
(This free transfer tool is not compatible with the following GPS models: NUVI, iQue and C550)
1. Just click the link "I donīt have MapSource" on our registration software once you have registered it to run the transfer tool.
2. Click "Add maps"
3. A new window will open. Navigate to C:/GMAP/Iraq and select the following files:
12301600.IMG 12301601.IMG 12301602.IMG
12301603.IMG 12301604.IMG 12301605.IMG
12301606.IMG 12301607.IMG 12301608.IMG
12301609.IMG
4. Press OK button.
5. Turn on and plug your GPS to your PC.
6. Click "Upload maps to GPS" to beggin transfer
12301600.IMG 12301601.IMG 12301602.IMG
12301603.IMG 12301604.IMG 12301605.IMG
12301606.IMG 12301607.IMG 12301608.IMG
12301609.IMG
4. Press OK button.
5. Turn on and plug your GPS to your PC.
6. Click "Upload maps to GPS" to beggin transfer
7. The software will automatically detect your GPS and beggin transfer of maps to your GPS.
8. Once the transfer process is completed, your new maps will be loaded and ready to be used on your GPS.
NOTICE: MapSend software is developed by a third party and has nothing to do with GLOBAL MAP. Although we have never receive information from a malfunction of this software, you use and transfer the maps using MapSend under your own risk
8. Once the transfer process is completed, your new maps will be loaded and ready to be used on your GPS.
NOTICE: MapSend software is developed by a third party and has nothing to do with GLOBAL MAP. Although we have never receive information from a malfunction of this software, you use and transfer the maps using MapSend under your own risk
(c) Global Map
 |
 |
 |
Iraq
 |
 |
 |